| Author |
Thread |
|
Quicksilver
Advanced Member
Sweden
2,484 posts
Joined: Jul, 2007
|
 Posted - 2012/09/23 : 01:23:19
Sentient
My latest tune that one. I'm trying to make the voice samples clearer, but it's spoken in such a low frequency it's hard to make it stand out among the other things. I've cut some of the low end off, of course, but if I take out more it will be harder to make out the voice.
Any tips?
__________________________________
a.k.a. Phaaze
Phaaze - July 2016 mix
My SOUNDCLOUD
Alert moderator 
|
Charger
Senior Member
Singapore
278 posts
Joined: Jun, 2012
|
Posted - 2012/09/23 : 01:53:39
I think you should boost the 2-3 kHz region so that the vox will have more presence & clarity when the vox starts to become drown out.
__________________________________
For updates of my tracks & free downloads:
http://www.soundcloud.com/hedgehog-charger
Alert moderator
|
Hard2Get
Advanced Member
United Kingdom
12,639 posts
Joined: Jun, 2001
|
Posted - 2012/09/23 : 12:32:03
They aren't as unclear as you think they are. I think they are pretty much fine but would definitely benefit from a boost in the high end to bring them forward. There is also still a ton of bass on them although i guess that's kind of what you want with a vocal like that. But if you don't then you can get away with rolling off considerably more.
Alert moderator
Edited by - Hard2Get on 2012/09/23 12:33:10 |
Audio Warfare
Advanced Member
United Kingdom
2,997 posts
Joined: Mar, 2009
|
Posted - 2012/09/24 : 08:10:19
If using EQ doesn't give the desired effect you can always use a bit crusher to bring out the top end if you don't mind the vocals having a crunchy effect. You would likely have to roll off some of the top end though as it adds a lot.
I've not listened as I'm work but I'll check it out when I get in.
__________________________________
Listen to released and forthcoming Audio Warfare/Audio Weaponry tunes here:-
http://soundcloud.com/audio-warfare
Alert moderator
|
Quicksilver
Advanced Member
Sweden
2,484 posts
Joined: Jul, 2007
|
Posted - 2012/09/24 : 16:00:44
Thanks guys! I'm gonna try some of the tips here. I cut off some of the high end too, maybe I should set it back. I just don't want the voice to overpower everything but at the same time it must be clear. XD haha
__________________________________
a.k.a. Phaaze
Phaaze - July 2016 mix
My SOUNDCLOUD
Alert moderator
|
Printer friendly
